Home » Products » Pager » W2092F Numeric Pager

W2092F Numeric Pager

W2092F Numeric Pager

Product Number: W2092F (Version 1.0)

This W2092F 1 line numeric pager is classified into Flex pager and Pocsag pager according to the supported signal format. It is designed with 12 musical tones and 5 tone alerts. It can simultaneously store 20 messages, each with 24 characters. The frequency range supported by the beeper can be 138-174, 278-284, 405-480 or 928-932MHz band. Thus, this numeric pager can be widely applied in guest paging system, waiter paging system, hospital paging system, and so on.

Our range of numeric pager boasts small size and stable performances. Its password protection function is for PC cap code programming software and hand programming. Manufactured with the premium quality engineering material, the shell of this communication device is hard to be damaged as the product accidentally falls off or collides with other objects.



Technical Specifications of Numeric Pager Supporting Flex Signal Format

Frequency Range138-174, 278-284, 405-480, 928-932MHz band
Channel Spacing 25KHz and 20KHz
Signal Format compatible with Motorola-FLEX paging protocol, G.1.8 version
Data Transmission Rate 1600bps, 3200bps or 6400bps
Modulation System carrier frequency shift keying (NRZ)
Frequency Deviation ±4.8KHZ
Receiving Sensitivity 1600bps 8uV/m, 3200bps 10uV/m, 6400bps 12Uv/m
Selectivity 50dB (138-174 MHz), 50dB (278-284 MHz), 50dB (405-480 MHz), 40dB (928-932MHz)
Spurious Rejection more than 50dB
Image Rejection more than 50dB (138-480 MHz), more than 35dB (928-932MHz)
Frequency Stability ±10ppm (138-174 MHz),±5PPM (405-480 MHz), ±3PPM (928-932MHz)
Tone Alert Output more than 75dB(SPL) 10cm, frequency 2731HZ
Operating Voltage 0.9V (minimum)
Operating Temperature and Humidity -10℃ to 40℃, 95% (at 40℃)
Storing Temperature and Humidity -10℃ to 70℃, 95% (at 40℃)
Features of Numeric Pager Supporting Flex Signal Format
Message Storage Capacity 20 messages, 24 characters per message
Message Full Indication Available
Address Code 4 addresses
Display Format 1 line of 12 characters (9 segment display) and one line of symbols
Time/Date Display Real time, with time displayed in 12/24 hour format
In Range Indication If pager is within the range of reception, it will not be displayed.
(can be disabled by cap code programming software)
Power Consumption Standby 0.3mA, received 6mA
Low Voltage Alert low voltage indicator (Audible alert is optional.)
Backlight EL
Message Received Time Message receipt time is memorized and will be displayed together.
Message Protection 15 messages
Message Deletion individual and all
Melody Alert 12 musical tones
Tone Alert 5 different tone alerts
Tone Alert Time more than 8 seconds
Vibration Alert Build-in vibrator will be activated automatically to indicate receptions of calls.
Alarm built-in alarm function at preset time
Sequential Lockout optional
Do not Disturb Pager receives message without notification.
Password Protection for PC cap code programming software and hand programming
Battery one "AAA" battery (1.5V)
Battery Life 950 hours (alkaline battery)
Battery Back-up 15 seconds (when the battery is replaced)
Weight 50g
Size (L62.2×W42×H29.2)mm with bell clip
Technical Specifications of Numeric Pager Supporting Pocsag Signal Format
Frequency Range138-174, 278-284, 405-480, 928-932MHz bands
Channel Spacing 25KHz
Signal Format POCSAG
Data Transmission Rate 1600bps, 3200bps or 6400bps
Modulation System carrier frequency shift keying (NRZ)
Frequency Deviation ± 4.5KHZ
Receiving Sensitivity 512bps 5uV/m, 1200bps 7uV/m, 2400bps 10uV/m
Selectivity 50dB (138-174 MHz), 50dB (278-284 MHz), 50dB (405-480 MHz), 40dB (928-932MHz)
Spurious Rejection more than 50dB
Image Rejection more than 50dB (138-480 MHz), more than 35dB (928-932MHz)
Frequency Stability ± 10ppm (138-174 MHz), ± 5PPM (405-480 MHz), ± 3PPM (928-932MHz)
Tone Alert Output more than 75dB(SPL) 10cm, frequency 2731HZ
Operating Voltage 0.9V (minimum)
Operating Temperature and Humidity -10 ℃ to 40℃, 95% (at 40℃)
Storing Temperature and Humidity -10 ℃ to 70℃, 95% (at 40℃)
Features of Numeric Pager Supporting Pocsag Signal Format
Message Storage Capacity 20 messages, 24 characters per message
Message Full Indication available
Address Code 4 addresses
Display Format 1 line of 12 characters (9 segment display) and one line of symbols
Time/Date Display real time, with time displayed in 12/24 hour format
In Range Indication If pager is within range of reception, it will not be displayed
(can be disabled by cap code programming software)
Power Consumption Standby 0.3mA, received 6mA
Low Voltage Alert low voltage indicator (Audible alert is optional.)
Backlight EL
Message Received Time Message receipt time is memorized and will be displayed together.
Message Protection 15 messages
Message Deletion individual and all
Melody Alert 12 musical tones
Tone Alert 5 different tone alerts
Tone Alert Time more than 8 seconds
Vibration Alert Build-in vibrator will be activated automatically to indicate receptions of calls.
Alarm built-in alarm function at preset time
Sequential Lockout optional
Do not Disturb Pager receives message without notification.
Password Protection for PC cap code programming software and hand programming
Battery one "AAA" battery (1.5V)
Battery Life 950 hours (alkaline battery)
Battery Back-up 15 seconds (when the battery is replaced)
Weight 50g
Size (L62.2× W42× H29.2)mm with bell clip

As a professional pager manufacturer and paging system solutions provider in China, WEX provides a broad range of products that includes waterproof hospital pager, 900MHz Flex decoder board, 4 line alphanumeric pager, and more.

Related Products
Feedback Form